Transform your space with Florida Tile's latest collections.   Request Free Samples →

Tile Quality Questions a Quality Manager Actually Answers: Florida Tile, Removal, Epoxy, Sound Proofing, and a Jelly Roll Search

I’m the quality and brand compliance manager at florida-tile. Every tile shipment that reaches a customer—roughly 1,600 SKUs a year—crosses my desk first. I’ve rejected 3.1% of incoming batches in 2024 for dimensional tolerance problems, and I still get asked the same questions during site walks. These are the real ones. (Yes, even the Jelly Roll question.)

What exactly is florida-tile?

We’re a Florida-based tile supplier and contractor team serving builders, architects, and property managers. We stock porcelain, concrete, clay barrel, and wood-look tile, and we handle tile installation and removal on the commercial side. Our sweet spot is mid- to large-scale projects where consistency matters more than having endless SKUs in stock.

Honest limitation: if you’re looking for handmade artisan tile with dramatic shade variation from piece to piece, we’re probably not the right fit. For rectified porcelain, large-format concrete tile, and clay barrel that need to perform in Florida weather, that’s where we focus.

Does 'florida tile fort collins' mean you serve Fort Collins, Colorado?

Search that phrase, and you’re probably looking for a Florida Tile dealer in Fort Collins, Colorado. We’re florida-tile with a hyphen, a Florida-based company. We don’t have a distribution center in Fort Collins, so if you need local stock, a local dealer is going to be your fastest option.

What I’d check in Fort Collins: whether the dealer stocks retail inventory or has to order everything. If the tile has to be freighted in from Florida, you’re paying more for truck time and possibly sitting through a week of weather delays. I’ve had contractors order from us, then realize the freight cost cancels out the material savings—so the best recommendation is to compare delivered, installed cost, not per-tile price.

What should I know before florida tile removal?

Tile removal is demolition, not tile work. The biggest mistake I see is treating the slab as an afterthought. Once the old tile is up, you’re left with thin-set, adhesive, and often a surface that’s no longer flat.

If I remember correctly, we had a project in March 2023 where the client hired the cheapest removal crew to save $800. It took our installers two extra days to level the substrate before we could set one tile. That’s exactly the kind of hidden cost that makes the low bid look like a bad joke. (Note to self: I should have checked the slab before we bid the installation.)

For older tile, especially from the 1980s or earlier, test for asbestos in the mastic before demolition. That’s not me being cautious—it’s a disposal and safety issue that can stop a job cold.

Can sound proofing panels go under tile?

Careful here: sound proofing panels meant for walls are not the same as acoustic underlayment for floors. Rigid fiberglass panels will compress under the weight of tile and grout, turning your soundproofing into a void. That’s a failure waiting to happen.

Under tile, you want an acoustic membrane rated for compression and point-loading. It goes over the substrate and under the tile? Actually, most systems go over the substrate, with the tile set directly on top. The exact order depends on the manufacturer’s listed assembly, and you need to verify the membrane is rated for your tile type.

Per ASTM E492, impact insulation class (IIC) measures how well a floor assembly stops impact noise. For attached multifamily units, many Florida projects target IIC 50 or higher, but local code amendments vary. Verify with the building official before specifying.

So yes, acoustic underlayment belongs in the floor assembly. Wall-style sound proofing panels do not.

Can you apply epoxy floor coating over existing tile?

Short answer: yes, but condition matters. Epoxy floor coating over tile is possible when the tile is well-bonded, clean, and free of hairline cracks. The coating needs a mechanically profiled surface, so the tile usually has to be diamond-ground or shot-blasted first. That step is not optional. I’ve seen coating fail because somebody wiped the floor and rolled epoxy over glossy tile like it was paint.

The bigger risk is a loose tile. If your substrate has hollow spots, epoxy won’t hold the tile down. It will reflect the movement and crack within a year. In that case, removal and repair is the honest recommendation, even though it costs more upfront. Total cost often favors the fix that doesn’t come back at you in year two.

What’s the most common quality issue you reject in tile deliveries?

Shade variation gets the attention, but my most common rejection is dimensional tolerance—thickness differences over 0.5 mm across the same batch. That matters for large-format tile because lippage becomes visible at the joints. You cannot fix lippage with grout. You fix it with tile that’s actually flat.

It took me about 4 years and more than 4,000 inspections to understand that shade variation is not the same as a defect. Natural products and some porcelain lines are supposed to shift in color. What I’m looking for is whether the variation stays within the manufacturer’s stated range. Per the TCNA Handbook (2024 edition), that’s part of the specification, not an excuse to reject a job.

That’s also why I run every batch under controlled lighting before it goes out. I’d rather hold a shipment here than have my name on a product that meets the technical spec but looks wrong in a lobby.

What should I ask before ordering large-format tile?

Most buyers focus on price and completely miss the lot number. The question everyone asks is 'What’s your best price?' The question they should ask is 'How many lots are in this order?' If you need 5,000 sq ft and it comes from multiple production runs, shade variation can look like a mistake. We consolidate orders by lot when possible, but that takes planning.

Also ask about flatness, rectification, water absorption, and breaking strength. For exterior Florida installations, water absorption matters as much as the color. If a supplier can’t tell you the lot size and absorption range, that’s a red flag.

How much weight has jelly roll lost?

This is the one that keeps showing up in our site analytics. I don’t have a verified number, and I wouldn’t trust a tile quality manager for weight-loss data. As of January 2025, Jelly Roll’s weight loss is a story in entertainment and health media, and any number I throw out would be a guess. Better to check a reputable health source or his own interviews.

If search brought you here by accident, I hope the tile answers helped. If you’re a contractor reading this, the takeaway is the same as Jelly Roll’s discipline: consistency over hype. Inspect the tile, verify the method, and don’t let a shiny price tag make you skip the substrate.

Share:

Leave a Reply