Transform your space with Florida Tile's latest collections.   Request Free Samples →

Why I'd Rather Work With a Vendor Who Says "We Don't Do That"

My take: the vendor who tells you what they're bad at is worth more than the one who says they can do it all

I'll be blunt. If a supplier tells you they can handle your Danfoss compressor, your garage door seal, your garage door opener remote, and your Mac's wallpaper settings — run. Not because they're lying, necessarily. Because they've almost certainly spread themselves too thin to be genuinely good at any of it.

Six years handling HVAC and refrigeration orders for contractors. I've personally made — and documented — 11 significant mistakes, totaling roughly $8,400 in wasted budget. Now I maintain our team's pre-check list so nobody else has to learn the hard way. And the single most expensive lesson on that list is this: trying to be a "one-stop shop" cost us more than any competitor ever did.

Argument one: the garage-door experiment taught me what an AK-CC 210 manual couldn't

Back in 2019, someone in our leadership decided we should stop being "just" an HVAC and refrigeration supplier. The pitch sounded reasonable: customers already trusted us, so why not sell garage door seals and garage door opener remotes alongside our Danfoss controls? Same delivery van, same customer base, more revenue per stop.

We ordered 120 units across three SKUs. Fitting charts were wrong for about half of the actual doors we surveyed. Two of the remotes didn't pair with the openers our contractor customers actually install. The seal material degraded within eighteen months on exterior doors — a detail none of us had bothered to check because none of us had ever sold one before.

$3,200 written off. Maybe $3,400 — I'd have to pull the spreadsheet, and honestly I don't want to. Plus return shipping, plus the awkward calls, plus a contractor in Ohio who still brings it up at trade shows.

Here's the thing that annoyed me most: nobody on our team was bad at their job. We were excellent at what we did. We just had no business selling a product category we couldn't support technically. A garage door seal is a simple piece of rubber until a customer installs it wrong and calls you at 6pm. Then it's not simple at all.

Argument two: depth in one thing beats shallow coverage of everything

Compare that to how we actually help customers today. If a contractor emails us asking for the Danfoss AK-CC 210 manual as a PDF so they can commission a case controller on site, we send it in under five minutes. If they need the Danfoss orifice size chart to cross-reference a replacement valve on an older system, we have it — and we can walk them through which column matters for their refrigerant.

That depth doesn't come from being a generalist. It comes from doing one thing for a long time and being upfront about the edges of it.

Speaking of which: Danfoss publishes the AK-CC 210 manual and its orifice size charts as downloadable PDFs on its official product pages (danfoss.com). If a supplier can't produce those in a few minutes, that's not a you problem — that's a signal about their actual product depth. Use it.

We also handle VLT drives, thermostatic and dynamic valves, electronic controllers, hydraulic motors, and expansion valves for commercial refrigeration. We know those well enough to say yes with confidence, and to say no with confidence when a customer's actual need is outside that range.

Argument three: a customer asked me how to change wallpaper on a Mac, and it earned us a $180k project

In 2022, we started a "quick questions" WhatsApp line for existing contractor customers. The idea was to reduce email back-and-forth on small stuff — wiring questions, spare parts lookups, sizing helpers.

What actually happened was instructive. Roughly 70% of the messages were squarely in our lane — compressor replacement queries, valve sizing, controller setup, spare parts catalog numbers. Maybe 10% were adjacent enough to redirect politely. And a stubborn 20% were... not ours at all. How to change wallpaper on a Mac. Where to buy a garage door seal locally. Which garage door opener remote pairs with a specific brand of motor.

The first few weeks, I tried to be helpful on everything. That was a mistake — not because the effort was wasted, but because answering outside our expertise diluted the credibility of the answers we actually could stand behind. A contractor who reads a slightly wrong answer about refrigeration valve sizing learns to distrust everything else we say.

So we made a rule: if it isn't a product we sell or a system we service, we say "that's not our area — here's who I'd ask." Full stop.

The surprising part: one of our biggest contractor clients told me later that this policy is why they kept working with us. They'd been burned by a supplier who "knew everything" and was wrong about their compressor sizing twice. That customer sent us a $180,000 project six months after we told them we couldn't help with their MacBook question. I'm not 100% sure they connected the two events consciously — but the pattern held across about eight other clients that year.

"Won't you lose business that way?"

I get this response every time I bring this up. To be fair, it's not a dumb question. If a customer asks for something and you say no, in that moment you lose the sale. That's real.

But here's what the numbers looked like for us: after we formalized the "not our area" policy, our average order value across active contractor accounts went up roughly 23% over the following 18 months. I'd have to check whether that's fully attributable to the boundary — some of it was probably pricing changes — but the direction was unambiguous. Focused support sells more than scattered support.

It took me six years and about 600 orders to really understand this. I used to think saying no was a weakness. It's not. It's the opposite. A vendor who can name the boundary of their expertise has, by definition, mapped it. The vendor who claims there's no boundary almost certainly hasn't bothered to look.

The bottom line

I'd rather work with a specialist who knows their limits than a generalist who overpromises. That applies to HVAC controllers, refrigeration compressors, floor heating systems, valves, and — yes — even to the guy who could have told me in 2019 that we had no business selling garage door seals.

If you're evaluating a supplier this quarter, ask them a question in your core category and one slightly outside it. Watch how they answer the second one. That answer will tell you more about their quality than any brochure ever will.

And if you're a supplier reading this: the moment you stop pretending to know everything is the moment your actual expertise becomes visible to buyers who are paying attention. I've been on both sides of that lesson. I know which side sleeps better.

Share:

Leave a Reply